Zhongtong Composite Material Machinery Manufacturing FactoryEmail:zhongtonglyg@163.com
WeChat customer service
Service Hotline13812348616
CONTACT USContact us
Service Hotline

Lianyungang zhongtong composite material machinery manufacturing factory

Company address:Jinrong Road, Haizhou District, Lianyungang City

Telephone:13812348616(Same WeChat account)

Company email:zhongtonglyg@163.com

Location:首页>>NEWS>>Q&A
Q&A

Operating glass winding machine should pay attention to matters

author: Release time:2021-04-23 16:17:48click:1397

Summary of information:

First of all, the switch of the glass winding machine is adjusted in the "semi-automatic" state, when the glass winding machine enters the semi-automatic state, and then the switch of the spindle is set to the "positive spindle" or "positive" or "negative" state, and then slowly rotate the speed regulation knob of the spindle, when the spindle is rotated.
Secondly, we should set the "left car right" switch in the "left" or "right" state according to the need, the "current winding mode" window will indicate the direction of movement of the car, such as "head" or "bed end", the car of the glass winding machine will begin to move, if the spindle begins to accelerate, the car will begin to accelerate automatically.
In addition, in the semi-automatic setting, when the initial width of the yarn is "linear design", when the semi-automatic distance is different from the actual pitch, we can carry out the "car acceleration" and "car deceleration" buttons to increase or reduce the width of the yarn. The length of semi-automatic winding is no limit, that is, arbitrary, it is determined by the position of the "left car right" switch of the glass winding machine, if the "left car right" switch is in the middle, the car is stopped.

The way to stop the work of the FRP winding machine is: first adjust the "left car right" switch to the middle position, and then adjust the "automatic manual semi-automatic" switch to the middle position, which can exit from the semi-automatic inside. The specific process is as follows

1. Set the "automatic manual semi-automatic" switch of the FRP winding machine to the "semi-automatic" position, and the FRP winding machine will enter the semi-automatic state;
2, the spindle switch "positive spindle reverse" in "positive" or "reverse", slowly turn the spindle speed control knob, the spindle began to rotate;
3, according to the need to "left car right" switch to "left" or "right", "current winding mode" window will indicate the direction of car movement such as "head" or "bed end", FRP winding machine car began to move; When the main shaft accelerates, the car also accelerates automatically.
4, semi-automatic initial yarn width is the value of "linear design", when there is a difference between the actual pitch and the semi-automatic can be increased or reduced by "car acceleration" and "car deceleration" button;
5, the length of semi-automatic winding is arbitrary, depending on the position of the "left car right" switch of the FRP winding machine, when the switch is in the middle position, the car stops;
6, the stopping method of FRP winding machine is: first put the "left car right" switch in the middle position, and then put the "automatic manual semi-automatic" switch in the middle position to exit the semi-automatic.

Label of this article:
Online Service
contact information

Telephone

13812348616

QR Code
OnlineService