
Winding equipment manufacturers believe that the frequency of use of automatic winding machine is very high, so after long-term use of the equipment, some places need to be maintained and lubricated, especially the main parts of the winding machine and their connection points, which require additional effective maintenance and lubrication. So, which parts of the winding packaging machine need lubrication to ensure that the winding packaging machine equipment can be used normally for a long time?
1) Lubricate the gear meshing point and bearing oil hole with seat regularly once per shift, as well as all moving parts. Only by adhering to it day after day can it be effective, responsible for equipment maintenance, and provide technical support for the smooth progress of future work.
2) When the winding equipment manufacturer thinks that the winding equipment is filled with lubricating oil, please be careful not to drop oil on the transmission belt, so as to avoid the belt slipping, idling or premature aging and damage.
3) Winding equipment manufacturers believe that the reducer of winding equipment is an important part of the equipment. Oil-free operation is prohibited. After 300 hours of initial operation, clean the interior and replace with new oil. Oil changes every 2,500 hours after that. This phenomenon is a frequent occurrence and needs to be carefully implemented.
4) In fact, for the lubrication of the machine, when we use lubricating oil, we must also ensure the quality of the lubricating oil, which should be suitable for high-speed rotating parts, so as to ensure our lubrication effect.
Winding equipment manufacturers believe that the working principle of the winding machine is to put the wound object in the center of the turntable, start the turntable motor to rotate, naturally drive the turntable to rotate, so that the object to achieve the surrounding film winding machine. At the same time, the lifting motor also starts, driving the overall component of the winding and strapping machine to move up and down, so as to wrap the object in the height direction and realize the winding and packaging of the overall appearance of the object. This is not only conducive to the packaging requirements of cargo storage, transportation and mechanized loading and unloading operations, but also to prevent damage to the goods during transportation, play a dust-proof, moisture-proof, cleaning role, reduce production costs and improve production efficiency. In the winding process, it is mainly to adjust the tension of the film and wear the film.
Winding equipment manufacturers believe that the correct use of winding machine:
1. When the machine is in the initial position, fix the film on the turntable or goods, and press the automatic operation button;
2. When the turntable starts, it starts to run at a high speed. With the running of the turntable, the film is automatically output. At the same time, the turntable counts, and when the bottom setting value is reached, the frame begins to rise.
3. The winding equipment manufacturer believes that when the frame rises to the position where the photoelectric switch cannot illuminate the goods, after the set delay, the frame stops rising, and the next number is counted once. The wheel keeps spinning and counting. When the set number of top turns is reached, the film holder descends and stops when it reaches the bottom. Count up and down again, including the bottom turn.
4. And so on, until the up and down times reach the set value, the packaging process is completed. The turntable descends slowly and stops at the initial detection point.